Flat-bed pig bleeding conveyor

Review flat-bed pig bleeding conveyor dimensions, drive and blood collection. Coordinate the stunning outlet, working surface and hoist transfer before quotation.

A flat-bed pig bleeding conveyor receives pigs after stunning and carries them through the sticking position towards hanging. Use the configuration table to review the footprint, drive and blood collection, then match the receiving surface and outlet to your stunning and hoisting equipment.

Three product-presentation photographs of flat-bed pig conveyors with stainless-steel transfer boards

Flat-bed conveyor reference configuration

SpecificationDocumented configuration
Overall dimensions7000 × 1500 × 800 mm
Drive power3 kW
Transfer-board tube80 × 40 × 3 mm, 304 stainless steel
Frame tube50 × 50 × 2.5 mm, 304 stainless steel
Guard thickness2 mm stainless steel
Conveyor-chain pitch100 mm
Blood-collection trough304 stainless steel
Drive/tensioningOne drive and one stainless-steel screw tensioner

The presentation describes approximately 40 seconds on the work surface during sticking and hanging. That is not a statement that the complete bleeding process takes 40 seconds.

Configuration source: Zhengye flat-bed conveyor presentation, pages 2–3.

Connect stunning, sticking and hanging

Measure the discharge chute from the stunning conveyor and the receiving surface height. Mark the sticking position, operator access and route to the hoist or suspended rail. Agree how an interruption will stop the connected equipment rather than leaving incompatible transfer speeds.

Separate product transfer from blood and wash water

Locate the blood outlet, cleaning spray and workshop drain connections. Confirm which collection pipework and controls belong to the conveyor package and which are installed locally. Include access to the chain, tensioner and underside of the work surface in the drawing.

See the pig stunning conveyor, hoisting and rail transfer and equipment reference library. Send the measured transfer layout.

Flat bleeding conveyor price and supply questions

How is a flat bleeding conveyor priced?

Price follows the number of positions, conveyor length, drive arrangement and the transfer into scalding. Frame and drainage specification also change the figure.

Is it available as a single machine?

Yes, the flat bleeding conveyor is available for sale on its own, and it is quoted together with the stunning unit when both are replaced in one project.

What do you need to quote one?

Pigs per hour, available floor length, the bleeding time required and the inlet position of the scalding unit.

Check the flat-bed conveyor against the transfer layout

  • Site measurements: provide the stunning discharge-chute position, receiving-surface height, available length and operator aisle.
  • Parameter check: compare the listed dimensions and drive with the intended arrangement; coordinate conveying speed and time on the working surface with the connected equipment.
  • Collection and services: mark the blood outlet, wash-water and drainage connections, control interlocks and access below the conveyor.

Request a flat-bed bleeding-conveyor quotation

Review the stunning-conveyor outlet and hoisting and rail transfer. Compare the roller conveyor configuration for a different horizontal-transfer arrangement.