The ZY-FX pig roller bleeding conveyor moves pigs horizontally after stunning while the trough collects blood. Compare the length options, adjustable speed and drive configuration below, then coordinate the stunning outlet, sticking position and hanging point around the available route.
ZY-FX manual configuration
| Specification | Documented configuration |
|---|---|
| Effective width | 920 mm; the manual also allows site customization |
| Standard length options | 6 m / 9 m / 12 m; sections may be connected |
| Variable conveying speed | 5–15 m/min |
| Motor rating range | 1.5–2.2 kW; configuration dependent |
| Roller tube | φ76 × 4 mm, polished 304 stainless steel |
| Supply | AC 380 V, 50 Hz, three-phase five-wire |
| Manual-rated handling capacity | 250–400 pigs/hour on a stated 90 kg/pig basis |
| Mass per unit length | Approximately 150 kg/m; not total machine mass |
| Blood trough | 2 mm 304 stainless steel; the manual specifies a 3° fall |
| Drive/control enclosure protection | IP65 motor / IP66 enclosure, as listed |
Choose the final length, motor and installed height from the equipment schedule. The listed handling range is a manual rating with a stated animal basis, not an accepted project throughput.
Configuration source: Zhengye ZY-FX roller-conveyor manual, page 2.
Selection starts with the available bleeding route
Provide the animal-weight range, work pattern and measured space between stunning discharge and hanging. Identify which conveyor sections remain and where operator access is required. Review line speed against the full process arrangement rather than choosing the shortest section that fits.
Define the services and collection boundary
Mark the blood discharge, wash-water connection, cleaning access and control interlocks on the drawing. Where pneumatic accessories are selected, include their air-service requirement in the approved utility schedule. Confirm the cleaning package and access around rollers and chains with the operating team.
Compare the flat-bed alternative and suspended bleeding rail. Prepare the project inputs before requesting the selected conveyor configuration.
Roller bleeding conveyor price and supply questions
What sets the price of a roller bleeding conveyor?
Price depends on roller count, roller pitch, drive arrangement and the transfer into scalding. Stainless specification and wash-down access also affect the figure.
Can I order the roller conveyor separately?
It is available for sale as an individual section, and it is normally quoted together with the rails and the scalding inlet it connects to.
What information is required?
Line rate, roller pitch needed, rail height, available length and the position of the scalding unit.
Prepare the ZY-FX conveyor selection brief
- Measured space: provide the clear route from stunning to hanging, transfer heights, retained sections and operator-access requirements.
- Configuration check: select length and speed for the intended process and animal range. The handling rating has stated animal-weight conditions, and mass per unit length is not total machine mass.
- Services: mark power, control interlocks, wash water and the blood outlet; include an air supply when pneumatic options are selected.
Request a ZY-FX roller-conveyor quotation
Compare the flat-bed bleeding conveyor and suspended bleeding route when defining the overall transfer arrangement.